Verila Ca-2-G EP
Water Resistant ▪ Extreme Pressure [EP] ▪ Calcium Grease Containing Graphite
Verila Ca-2-G EP is water resistant Calcium soap thickened lubricating grease containing graphite. The addition of graphite powder ensuring considerably high EP properties and reliable protection against wear. The grease contains stickiness additive which providing extraordinary elasticity of the grease and superior adhesion to the metal surfaces
- Very Good Anti-Wear Protection, even in the grease starving conditions. Contains very fine graphite powder.
- Extreme Pressure [EP] grease with High Load Carrying Capacity.
- Excellent Resistance against water wash-out.
- Operating Temperature range from -20° up to 60° Celsius.
- Very Good Affinity to the metal surfaces, protect metal parts even in the presence of water.
- Very Good Rust and Corrosion Protection.
Generally used, water resistant lubricating grease containing graphite. Suitable for lubricating points where beyond water resistance the highly efficient protection against wear is required. Designated for the lubrication of heavily loaded, slow moving mechanisms in industry and agriculture, including open gear drives, threaded joints, chain drives, elevators’ sliders, metal ropes and other open heavily loaded sliding pairs.
| Grease Classifications | ||
|---|---|---|
| ISO 6743-9 L-XBAHB 2 ⋅ DIN 51502 KPF2C-20 | ||
| Test Parameter | Test Method | Value |
| Appearance | Visual | Smooth and Homogenous |
| Color | Visual |
Black
|
| Thickener | Calcium | |
| Dry Lubricant | Graphite | |
| Base Oil Viscosity at 40 Celsius, mm2/s | EN ISO 3104 | 46 |
| NLGI Grade | ASTM D217 | 2 |
| Operating Temperature Range |
-20 to 60 Celsius |
|
| Cone Penetration, Worked, 0.1 mm | ISO 2137 | 265 – 295 |
| Dropping Point | ISO 6299 | > 95 Celsius |
| Corrosive Effects on Copper, 5h @ 70 Celsius | ASTM D4048 | max 1 |
| Water Washout Test at 40 Celsius, wt.% loss | ISO 11009 | < 10 |
| Water Resistance Test | DIN 51 807-1 | 0-40 Typical |
| Four-Ball Wear Test, Wear Scar, mm | ASTM D2266 | 0.50 Typical |
| Four-Ball EP Test, Weld Point, kgf | ASTM D2596 | 315 |
While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur