VERILA BENT EP 2 VG220
High Temperature - High Performance - Extreme Pressure (EP) - Inorganic Thickener
VERILA BENT EP 2 VG220 is a High-Performance lubricating grease based on inorganic thickener and mineral oil of ISO VG220. The inorganic thickener makes it suitable for wide temperature range, especially at extremely high temperatures. The product has very good oxidation stability and excellent adhesive properties. It contains special additives which ensure rust, corrosion and wear protection for the lubricated parts as well as resistance against heavy loads.
- Wide range of high temperature Automotive and Industrial applications, up to 180 degrees Celsius.
- Excellent Lubricating Properties at High Temperatures. Does not drop.
- High Load Carrying Capacity. Special extreme pressure additives enable it to withstand heavy loads without failure of the lubricant film.
- Very Good Rust and Corrosion Protection.
- Excellent Oxidation & Thermal Stability minimize grease degradation and formation of deposits.
High Performance grease designed for both automotive and industrial applications running at high temperatures, including applications such as in conveyer bearings, heat treatment, metalworking autoclaves, kilns, tunnel ovens. Typical applications are: bearings that run at heavy loads and high temperature, sliding surfaces, bushings.
| Grease Classifications | ||
|---|---|---|
| ISO 6743-9 L-XBFHB 2 DIN 51502 KP2R-20 | ||
| Test Parameter | Test Method | Value |
|
Appearance |
Visual |
Smooth and Buttery |
|
Color |
Visual |
Yellow-to-Brown
|
|
Thickener |
Inorganic |
|
|
Base Oil Viscosity at 40 Celsius, mm2/s |
ISO 3104 |
220 |
|
NLGI Grade |
ASTM D217 |
2 |
|
Operating Temperature Range |
-20 to 180 Celsius |
|
|
Cone Penetration, Worked, 0.1 mm |
ISO 2137 |
265 -295 |
|
Dropping Point |
ISO 6299 |
> 305 Celsius |
|
Oil Separation, 42h at 400 Celsius, wt.% |
IP 121 |
4% Typical |
|
Corrosive Effects on Copper, 24h at 100 Celsius |
ASTM D4048 |
max 1 |
|
Dynamic Rust Test, EMCOR |
ISO 11007 |
0-0 |
|
Water Resistance Test |
DIN 51 807-1 |
max 1-90 |
|
Four-Ball EP Test, Weld Point, N |
ASTM D2596 |
min 2500 |
While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur