Verila Lithium EP 00 & 00/000
Semi-Fluid - Extreme Pressure (EP) - Lithium Grease
Verila Lithium EP 00 & Lithium EP 00/000 are semi-fluid lubricating greases based on lithium 12-hydroxystearate soap and high-quality mineral base oil. These greases contain antioxidants, rust and corrosion inhibitors and special extreme pressure and anti-wear additives.
- Very Good Mechanical Stability, resistant against softening.
- Very Good Rust and Corrosion Protection offering Strong affinity with metal thus protect bearing surfaces.
- Excellent Anti-Wear & Load Carrying Capacity, durable lubrication film protects metal surfaces against wear.
- Very Good Oxidation Stability.
- Excellent Pumpability even at very low temperatures.
Suitable for both, industrial and automotive applications where semi-fluid NLGI 00 or 00/000 grade greases are recommended.Typical application: Centralized Lubrication Systems applied in industrial applications as well as trucks, off-road and agricultural equipment; Chassis lubrication, by means of a centralized system; Equipment operated in the open with long piping; Particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gear cases where conventional gear oils cannot be retained because of leakage.
| Grease Classifications | ||||
|---|---|---|---|---|
| ISO 6743-9 | L-XCCEB 00 | L-XCBEB 00/000 | ||
| DIN 51502 | GP00K-30 | GP00/000G-30 | ||
| Test Parameter | Test Method | Value | ||
| Appearance | Visual | Smooth and Homogenous | ||
| Color | Visual |
Yellow-to-Brown
|
||
| Thickener | Lithium 12-hydroxystearate | |||
| Base Oil Viscosity at 40 Celsius, mm2/s | ISO 3104 | 100 | ||
| NLGI Grade | ASTM D217 | 00 | 00/000 | |
| Operating Temperature Range | -30 to 120 Celsius | -30 to 100 Celsius | ||
| Cone Penetration, Worked, 0.1 mm | ISO 2137 | 400 – 430 | 430 – 460 | |
| Dropping Point, 0 Celsius | ISO 6299 | > 175 Celsius | > 150 Celsius | |
| Rust Test, EMCOR | ISO 11007 | 0-0 | ||
| Four-Ball EP Test, Weld Point, N | ASTM D2596 | 3150 | ||
| Four-Ball Wear Test, Wear Scar, mm | ASTM D2266 | 0.50 Typical | ||
| Low Temperature Flow Pressure, hPa | DIN 51 805 | < 1200 @ -30 Celsius | ||
While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur